Microstructure Evolution and Recrystallization Mechanisms of a Cu-Cr-Sn Alloy during Thermal Deformation Process.

Thermal deformation behavior of Cu-Cr-Sn alloy ingots under deformation temperatures ranging from 600 °C to 950 °C and strain rates from 0.01 s-1 to 10 s-1 was investigated in detail. The thermal deformation constitutive equation and thermal processing map of the alloy were established, respectively. The activation energy Q was determined as 430.61 KJ/mol. The optimal deformation system corresponding to the hot working diagram was a deformation temperature of 900 °C and strain rate of 0.1 s-1. Under these deformation conditions, twin dynamic recrystallization (TDRX), continuous dynamic recrystallization (CDRX), and discontinuous dynamic recrystallization (DDRX) occurred simultaneously, with the twinning process causing the stress-strain curve to exhibit a wavy change. The thermal deformation microstructure of the alloy is co-regulated by different recrystallization mechanisms, with DDRX occurring mainly at low deformation temperatures, and both CDRX and DDRX occurring at high deformation temperatures.

Thermally Robust Solvent-Free Liquid Polyplexes for Heat-Shock Protection and Long-Term Room Temperature Storage of Therapeutic Nucleic Acids.

Nucleic acid therapeutics have attracted recent attention as promising preventative solutions for a broad range of diseases. Nonviral delivery vectors, such as cationic polymers, improve the cellular uptake of nucleic acids without suffering the drawbacks of viral delivery vectors. However, these delivery systems are faced with a major challenge for worldwide deployment, as their poor thermal stability elicits the need for cold chain transportation. Here, we demonstrate a biomaterial strategy to drastically improve the thermal stability of DNA polyplexes. Importantly, we demonstrate long-term room temperature storage with a transfection efficiency maintained for at least 9 months. Additionally, extreme heat shock studies show retained luciferase expression after heat treatment at 70 °C. We therefore provide a proof of concept for a platform biotechnology that could provide long-term room temperature storage for temperature-sensitive nucleic acid therapeutics, eliminating the need for the cold chain, which in turn would reduce the cost of distributing life-saving therapeutics worldwide.

Comparing Equil patch versus traditional catheter insulin pump in type 2 diabetes using continuous glucose monitoring metrics and profiles.

AIMS: It is not clear whether there are differences in glycemic control between the Equil patch and the MMT-712 insulin pump. Our objective was to compare two types of insulin pumps in the treatment of type 2 diabetes mellitus (T2DM), using continuous glucose monitoring (CGM) metrics and profiles. METHODS: This was a randomized case-crossover clinical trial. Participants were hospitalized and randomly allocated to two groups and underwent two types of insulin pump treatments (group A: Equil patch-Medtronic MMT-712 insulin pump; group B: Medtronic MMT-712-Equil patch insulin pump) separated by a 1-day washout period. Glycemic control was achieved after 7-8 days of insulin pump therapy. Each patient received CGM for 5 consecutive days (from day 1 to day 5). On day 3 of CGM performance, the Equil patch insulin pump treatment was switched to Medtronic MMT-712 insulin pump treatment at the same basal and bolus insulin doses or vice versa. CGM metrics and profiles including glycemic variability (GV), time in range (TIR, 3.9-10.0 mmol/L), time below range (TBR, <3.9 mmol/L), time above range (TAR, >10.0 mmol/L), and postprandial glucose excursions, as well as incidence of hypoglycemia. RESULTS: Forty-six T2DM patients completed the study. There was no significant difference in parameters of daily GV and postprandial glucose excursions between the Equil patch insulin pump treatment and the Medtronic insulin pump treatment. Similarly, there was no between-treatment difference in TIR, TBR, and TAR, as well as the incidence of hypoglycemia. CONCLUSION: The Equil patch insulin pump was similar to the traditional MMT-712 insulin pump in terms of glycemic control. Equil patch insulin pump is a reliable tool for glycemic management of diabetes mellitus.

A genome-wide association study based on the China Kadoorie Biobank identifies genetic associations between snoring and cardiometabolic traits.

Despite the high prevalence of snoring in Asia, little is known about the genetic etiology of snoring and its causal relationships with cardiometabolic traits. Based on 100,626 Chinese individuals, a genome-wide association study on snoring was conducted. Four novel loci were identified for snoring traits mapped on SLC25A21, the intergenic region of WDR11 and FGFR, NAA25, ALDH2, and VTI1A, respectively. The novel loci highlighted the roles of structural abnormality of the upper airway and craniofacial region and dysfunction of metabolic and transport systems in the development of snoring. In the two-sample bi-directional Mendelian randomization analysis, higher body mass index, weight, and elevated blood pressure were causal for snoring, and a reverse causal effect was observed between snoring and diastolic blood pressure. Altogether, our results revealed the possible etiology of snoring in China and indicated that managing cardiometabolic health was essential to snoring prevention, and hypertension should be considered among snorers.

Electrocatalytic Degradation of Phenolic Wastewater Using a Zero-Gap Flow-Through Reactor Coupled with a 3D Ti/RuO2-TiO2@Pt Electrode.

In this study, the performance of a zero-gap flow-through reactor with three-dimensional (3D) porous Ti/RuO2-TiO2@Pt anodes was systematically investigated for the electrocatalytic oxidation of phenolic wastewater, considering phenol and 4-nitrophenol (4-NP) as the target pollutants. The optimum parameters for the electrochemical oxidation of phenol and 4-NP were examined. For phenol degradation, at an initial concentration of 50 mg/L, initial pH of 7, NaCl concentration of 10.0 g/L, current density of 10 mA/cm2, and retention time of 30 min, the degradation efficiency achieved was 95.05%, with an energy consumption of 15.39 kWh/kg; meanwhile, for 4-NP, the degradation efficiency was 98.42% and energy consumption was 19.21 kWh/kg (at an initial concentration of 40 mg/L, initial pH of 3, NaCl concentration of 10.0 g/L, current density of 10 mA/cm2, and retention time of 30 min). The electrocatalytic oxidation of phenol and 4-NP conformed to the pseudo-first-order kinetics model, and the k values were 0.2562 min-1 and 0.1736 min-1, respectively, which are 1.7 and 3.6-times higher than those of a conventional electrolyzer. Liquid chromatography-mass spectrometry (LC-MS) was used to verify the intermediates formed during the degradation of phenol or 4-NP and a possible degradation pathway was provided. The extremely narrow electrode distance and the flow-through configuration of the zero-gap flow-through reactor were thought to be essential for its lower energy consumption and higher mass transfer efficiency. The zero-gap flow-through reactor with a novel 3D porous Ti/RuO2-TiO2@Pt electrode is a superior alternative for the treatment of industrial wastewater.

Construction of a Zero-gap Flow-Through Microfluidic Reactor with Porous RuO2-IrO2@Pt Anode for Electrocatalytic Oxidation of Antibiotics in Water.

In this study, a zero-gap flow-through microfluidic reactor was constructed for the degradation of tetracycline and norfloxacin in water using a porous Ti/RuO2-IrO2@Pt electrode as the anode and porous titanium plate as the cathode. The operation parameters included electrolyte type, electrolyte concentration, current density, initial concentration of pollutants and pH, were investigated. The degradation efficiency and energy consumption were calculated and compared with traditional electrolyzer. In the zero-gap flow-through microfluidic reactor, 100 % of both tetracycline and norfloxacin can be decomposed in 15 min, and high mineralization rate were achieved under the optimized reaction condition. And the reaction was consistent with pseudo-first-order kinetics with k value of 0.492 cm-1 and 1.010 cm-1, for tetracycline and norfloxacin, respectively. In addition, the energy consumption was 28.33 kWh ⋅ kg-1 TC and 8.36 kWh ⋅ kg-1 NOR, for tetracycline and norfloxacin, respectively, which was much lower than that of traditional electrolyzer. The LC-MS results showed that tetracycline underwent a series of demethylation, dehydration and deamination reactions, and the norfloxacin went through ring opening reaction, decarboxylation and hydroxylation reaction, and finally both produced CO2 and H2O.

Efficient and Selective Electrochemical Nitrate Reduction to N2 Using a Flow-Through Zero-Gap Electrochemical Reactor with a Reconstructed Cu(OH)2 Cathode: Insights into the Importance of Inter-Electrode Distance.

Electrochemically converting nitrate, a widely distributed nitrogen contaminant, into harmless N2 is a feasible and environmentally friendly route to close the anthropogenic nitrogen-based cycle. However, it is currently hindered by sluggish kinetics and low N2 selectivity, as well as scarce attention to reactor configuration. Here, we report a flow-through zero-gap electrochemical reactor that shows a high performance of nitrate reduction with 100% conversion and 80.36% selectivity of desired N2 in the chlorine-free system at 100 mg-N·L-1 NO3- while maintaining a rapid reduction kinetics of 0.07676 min-1. More importantly, the mass transport and current utilization efficiency are significantly improved by shortening the inter-electrode distance, especially in the zero-gap electrocatalytic system where the current efficiency reached 50.15% at 5 mA·cm-2. Detailed characterizations demonstrated that during the electroreduction process, partial Cu(OH)2 on the cathode surface was reconstructed into stable Cu/Cu2O as the active phase for efficient nitrate reduction. In situ characterizations revealed that the highly selective *NO to *N conversion and the N-N coupling step played crucial roles during the selective reduction of NO3- to N2 in the zero-gap electrochemical system. In addition, theoretical calculations demonstrated that improving the key intermediate *N coverage could effectively facilitate the N-N coupling step, thereby promoting N2 selectivity. Moreover, the environmental and economic benefits and long-term stability shown by the treatment of real nitrate-containing wastewater make our proposed electrocatalytic system more attractive for practical applications.

Causal association between snoring and stroke: a Mendelian randomization study in a Chinese population.

Background: Previous observational studies established a positive relationship between snoring and stroke. We aimed to investigate the causal effect of snoring on stroke. Methods: Based on 82,339 unrelated individuals with qualified genotyping data of Asian descent from the China Kadoorie Biobank (CKB), we conducted a Mendelian randomization (MR) analysis of snoring and stroke. Genetic variants identified in the genome-wide association analysis (GWAS) of snoring in CKB and UK Biobank (UKB) were selected for constructing genetic risk scores (GRS). A two-stage method was applied to estimate the associations of the genetically predicted snoring with stroke and its subtypes. Besides, MR analysis among the non-obese group (body mass index, BMI <24.0 kg/m2), as well as multivariable MR (MVMR), were performed to control for potential pleiotropy from BMI. In addition, the inverse-variance weighted (IVW) method was applied to estimate the causal association with genetic variants identified in CKB GWAS. Findings: Positive associations were found between snoring and total stroke, hemorrhagic stroke (HS), and ischemic stroke (IS). With GRS of CKB, the corresponding HRs (95% CIs) were 1.56 (1.15, 2.12), 1.50 (0.84, 2.69), 2.02 (1.36, 3.01), and the corresponding HRs (95% CIs) using GRS of UKB were 1.78 (1.30, 2.43), 1.94 (1.07, 3.52), and 1.74 (1.16, 2.61). The associations remained stable in the MR among the non-obese group, MVMR analysis, and MR analysis using the IVW method. Interpretation: This study suggests that, among Chinese adults, genetically predicted snoring could increase the risk of total stroke, IS, and HS, and the causal effect was independent of BMI. Funding: National Natural Science Foundation of China, Kadoorie Charitable Foundation Hong Kong, UK Wellcome Trust, National Key R&D Program of China, Chinese Ministry of Science and Technology.

Association of physical activity with risk of chronic kidney disease in China: A population-based cohort study.

BACKGROUND: Information on the association between physical activity (PA) and the risk of chronic kidney disease (CKD) is limited. We aimed to explore the associations of total, domain-specific, and intensity-specific PA with CKD and its subtypes in China. METHODS: The study included 475,376 adults from the China Kadoorie Biobank aged 30-79 years during 2004-2008 at baseline. An interviewer-administered questionnaire was used to collect the information about PA, which was quantified as metabolic equivalent of task hours per day (MET-h/day) and categorized into 4 groups based on quartiles. Cox regression was used to analyze the association between PA and CKD risk. RESULTS: During a median follow-up of 12.1 years, 5415 incident CKD cases were documented, including 1159 incident diabetic kidney disease (DKD) cases and 362 incident hypertensive nephropathy (HTN) cases. Total PA was inversely associated with CKD risk, with an adjusted hazard ratio (HR, 95% confidence interval (95%CI)) of 0.83 (0.75-0.92) for incident CKD in the highest quartile of total PA as compared with participants in the lowest quartile. Similar results were observed for risk of DKD and HTN, and the corresponding HRs (95%CIs) were 0.75 (0.58-0.97) for DKD risk and 0.56 (0.37-0.85) for HTN risk. Increased nonoccupational PA, low-intensity PA, and moderate-to-vigorous-intensity PA were significantly associated with a decreased risk of CKD, with HRs (95%CIs) of 0.80 (0.73-0.88), 0.85 (0.77-0.94), and 0.85 (0.76-0.95) in the highest quartile, respectively. CONCLUSION: PA, including nonoccupational PA, low-intensity PA, and moderate-to-vigorous-intensity PA, was inversely associated with the risk of CKD, including DKD, HTN, and other CKD, and such associations were dose dependent.

Self-Assembly of Polyoxometalate-Based Sub-1†nm Polyhedral Building Blocks into Rhombic Dodecahedral Superstructures.

Self-assembly of subnanometer (sub-1 nm) scale polyhedral building blocks can yield some superstructures with novel and interesting morphology as well as potential functionalities. However, achieving the self-assembly of sub-1 nm polyhedral building blocks is still a great challenge. Herein, through encapsulating the titanium-substituted polyoxometalate (POM, K7 PTi2 W10 O40 ) with tetrabutylammonium cations (TBA+ ), we first synthesized a sub-1 nm rhombic dodecahedral building block by further tailoring the spatial distribution of TBA+ on the POM. Molecular dynamics (MD) simulations demonstrated the eight TBA+ cations interacted with the POM cluster and formed the sub-1 nm rhombic dodecahedron. As a result of anisotropy, the sub-1 nm building blocks have self-assembled into rhombic dodecahedral POM (RD-POM) assemblies at the microscale. Benefiting from the regular structure, Br- ions, and abundant active sites, the obtained RD-POM assemblies exhibit excellent catalytic performance in the cycloaddition of CO2 with epoxides without co-catalysts. This work provides a promising approach to tailor the symmetry and structure of sub-1 nm building blocks by tuning the spatial distribution of ligands, which may shed light on the fabrication of superstructures with novel properties by self-assembly.

Membrane and Lumen-Compartmentalized Polymersomes for Biocatalysis and Cell Mimics.

Compartmentalization is a crucial feature of a natural cell, manifested in cell membrane and inner lumen. Inspired by the cellular structure, multicompartment polymersomes (MCPs), including membrane-compartmentalized polymersomes and lumen-compartmentalized polymersomes (polymersomes-in-polymersomes), have aroused great expectations for biological applications such as biocatalysis and cell mimics in the past decades. Compared with traditional polymersomes, MCPs have advantages in encapsulating multiple enzymes separately for multistep enzymatic cascade reactions. In this review, first, the design principles and preparation methods of membrane-compartmentalized and lumen-compartmentalized polymersomes are summarized. Next, recent advances of MCPs as nanoreactors and cell mimics to mimic subcellular organelles or artificial cells are discussed. Finally, the future research directions of MCPs are prospected.

A high-resolution haplotype-resolved Reference panel constructed from the China Kadoorie Biobank Study.

Precision medicine depends on high-accuracy individual-level genotype data. However, the whole-genome sequencing (WGS) is still not suitable for gigantic studies due to budget constraints. It is particularly important to construct highly accurate haplotype reference panel for genotype imputation. In this study, we used 10 000 samples with medium-depth WGS to construct a reference panel that we named the CKB reference panel. By imputing microarray datasets, it showed that the CKB panel outperformed compared panels in terms of both the number of well-imputed variants and imputation accuracy. In addition, we have completed the imputation of 100 706 microarrays with the CKB panel, and the after-imputed data is the hitherto largest whole genome data of the Chinese population. Furthermore, in the GWAS analysis of real phenotype height, the number of tested SNPs tripled and the number of significant SNPs doubled after imputation. Finally, we developed an online server for offering free genotype imputation service based on the CKB reference panel (https://db.cngb.org/imputation/). We believe that the CKB panel is of great value for imputing microarray or low-coverage genotype data of Chinese population, and potentially mixed populations. The imputation-completed 100 706 microarray data are enormous and precious resources of population genetic studies for complex traits and diseases.

Risk factors for hypokalemia and its association with postoperative recovery in patients scheduled for radical gastrectomy: a retrospective study.

BACKGROUND: Hypokalemia is common in patients of various operations, especially gastrointestinal surgery, which seriously affects the safety and enhanced recovery after surgery. Our study aims to explore the risk factors of preoperative hypokalemia of radical gastrectomy for gastric cancer and analyze its impact on postoperative recovery. METHODS: A total of 122 patients scheduled for radical gastrectomy from September, 2022 to December, 2022 were retrospectively analyzed. According to the serum potassium level before skin incision, patients were divided into hypokalemia group (n = 64) and normokalemia group (n = 58). Factors including age, gender, BMI, ASA classification, glutamic pyruvic transaminase (ALT), glutamic oxaloacetic transaminase (AST), creatinine, blood urea nitrogen (BUN), albumin, hypertension history, whether taking calcium channel blockers, ß-receptor blockers, angiotensin converting enzyme inhibitors (ACEI) or angiotensin receptor antagonist (ARB), thiazide diuretics and other drugs, anemia history, diabetes mellitus history, inability to eat or intestinal obstruction, vomiting, diarrhea, hypokalemia on admission and whether under cooperation with clinical nurse specialist were compared between groups. Univariate logistic regression analysis was used to determine risk factors for hypokalemia with p < 0.2 included as a cutoff. Multivariate logistic regression was used to analyze the influencing factors of preoperative hypokalemia for the indicators with differences. A receiver operating characteristic (ROC) curve was used to evaluate the efficacy of the regression model. Primary exhaust time and defecation time after surgery were compared between the two groups. RESULTS: The use of ACEI or ARB [OR 0.08, 95% CI (0.01 to 0.58), p = 0.012] and thiazide diuretics [OR 8.31, 95% CI (1.31 to 52.68), p = 0.025], inability to eat for more than 3 days or intestinal obstruction [OR 17.96, 95% CI (2.16 to 149.43), p = 0.008], diarrhea for more than 48 h [OR 6.21, 95% CI (1.18 to 32.61), p = 0.031] and hypokalemia on admission [OR 8.97, 95% CI (1.05 to 77.04), p = 0.046] were independent influencing factors of hypokalemia before skin incision. Primary postoperative exhaust time and defecation time was significantly longer in the hypokalemia group than in the normokalemia group, no matter after laparoscopic radical gastrectomy (p = 0.044, p = 0.045, respectively) or open radical gastrectomy (p = 0.033, p = 0.019, respectively). CONCLUSION: Early attention and management of serum potassium in patients undergoing radical gastrectomy can better reduce perioperative adverse reactions and promote recovery of gastrointestinal function.

Hand grip strength is inversely associated with total daily insulin dose requirement in patients with type 2 diabetes mellitus: a cross-sectional study.

Background: Short-term (2 weeks to 3 months) insulin intensive therapy using continuous subcutaneous insulin infusion (CSII) can improve islet beta cell function and prolong glycemic remission in patients with newly diagnosed type 2 diabetes mellitus (T2DM). However, the total daily insulin dose (TDD, IU/kg/d) required to achieve near-normoglycemic control with CSII still needs to be frequently adjusted based on blood glucose monitoring. Although real-time continuous glucose monitoring (rtCGM), which measures the interstitial fluid glucose concentration continuously without much difficulty, facilitates the adjustment of insulin dosage, its adoption in the T2DM population is strictly limited by insurance coverage and lack of awareness of rtCGM among clinicians. Thus, it is of clinical significance to identify easy-to-use parameters that may allow a more rapid and accurate prediction of TDD requirement. This study aimed to explore the association between hand grip strength (HGS) and TDD requirement in patients with T2DM receiving CSII therapy. Methods: A total of 180 eligible patients with T2DM were enrolled in the study and divided into three groups based on their HGS: low (L), medium (M), and high (H). The TDD requirement was calculated on day 7 or 8 of CSII treatment. Anthropometric parameters, including HGS, skeletal muscle mass, skeletal muscle index (SMI) and 6-m gait speed, and laboratory data, were collected on the morning of the second day after admission, within the first 24 h of CSII therapy. These parameters were used to identify significant predictors of TDD requirement using Pearson or Spearman correlation test, and stepwise multiple regression analysis. Results: There were no significant differences in age, duration of T2DM, waist-to-hip ratio (WHR), body mass index (BMI), blood pressure, liver function, estimated glomerular filtration rate, triglyceride, total cholesterol, glycosylated hemoglobin A1c (HbA1c), homeostatic model assessment of insulin resistance (HOMA-IR), and homeostasis model assessment of beta cell function (HOMA-ß) among the groups. The H group had higher body muscle mass-to-fat ratio (BMFR), skeletal muscle mass-to-fat ratio (SMFR), SMI, 6-m gait speed, and lower TDD requirement than the M and L groups. The HGS negatively correlated with TDD requirement (r = -0.33, p < 0.001) after adjusting for sex, age, BMI, WHR, HbA1c, Ln (HOMA-ß), Ln (HOMA-IR), Ln (BMFR), Ln (SMFR), SMI, and 6-m gait speed. Multivariate stepwise regression analysis indicated that HGS was an independent predictor of TDD requirement in patients with T2DM (ß = -0.45, p < 0 001). Conclusion: Lower HGS is associated with an increased TDD requirement in T2DM patients. HGS may facilitate the prediction of TDD requirement in T2DM patients receiving CSII therapy.

Long-Term Exposure to Fine Particulate Matter and Incidence of Esophageal Cancer: A Prospective Study of 0.5 Million Chinese Adults.

BACKGROUND & AIMS: Evidence is sparse and inconclusive on the association between long-term fine (≤2.5 µm) particulate matter (PM2.5) exposure and esophageal cancer. We aimed to assess the association of PM2.5 with esophageal cancer risk and compared the esophageal cancer risk attributable to PM2.5 exposure and other established risk factors. METHODS: This study included 510,125 participants without esophageal cancer at baseline from China Kadoorie Biobank. A high-resolution (1 × 1 km) satellite-based model was used to estimate PM2.5 exposure during the study period. Hazard ratios (HR) and 95% CIs of PM2.5 with esophageal cancer incidence were estimated using Cox proportional hazard model. Population attributable fractions for PM2.5 and other established risk factors were estimated. RESULTS: There was a linear concentration-response relationship between long-term PM2.5 exposure and esophageal cancer. For each 10-µg/m3 increase in PM2.5, the HR was 1.16 (95% CI, 1.04-1.30) for esophageal cancer incidence. Compared with the first quarter of PM2.5 exposure, participants in the highest quarter had a 1.32-fold higher risk for esophageal cancer, with an HR of 1.32 (95% CI, 1.01-1.72). The population attributable risk because of annual average PM2.5 concentration ≥35 µg/m3 was 23.3% (95% CI, 6.6%-40.0%), higher than the risks attributable to lifestyle risk factors. CONCLUSIONS: This large prospective cohort study of Chinese adults found that long-term exposure to PM2.5 was associated with an elevated risk of esophageal cancer. With stringent air pollution mitigation measures in China, a large reduction in the esophageal cancer disease burden can be expected.

Preparation of Porous Ti/RuO2-IrO2@Pt, Ti/RuO2-TiO2@Pt and Ti/Y2O3-RuO2-TiO2@Pt Anodes for Efficient Electrocatalytic Decomposition of Tetracycline.

Electrocatalytic oxidation (ECO) has attracted attention because of its high efficiency and environmental friendliness in water treatment. The preparation of anodes with high catalytic activity and long service lifetimes is a core part of electrocatalytic oxidation technology. Here, porous Ti/RuO2-IrO2@Pt, Ti/RuO2-TiO2@Pt, and Ti/Y2O3-RuO2-TiO2@Pt anodes were fabricated by means of modified micro-emulsion and vacuum impregnation methods with high porosity titanium plates as substrates. The scanning electron microscopy (SEM) images showed that RuO2-IrO2@Pt, RuO2-TiO2@Pt, and Y2O3-RuO2-TiO2@Pt nanoparticles were coated on the inner surface of the as-prepared anodes to form the active layer. Electrochemical analysis revealed that the high porosity substrate could result in a large electrochemically active area, and a long service life (60 h at 2 A cm-2 current density, 1 mol L-1 H2SO4 as the electrolyte, and 40 °C). The degradation experiments conducted on tetracycline hydrochloride (TC) showed that the porous Ti/Y2O3-RuO2-TiO2@Pt had the highest degradation efficiency for tetracycline, reaching 100% removal in 10 min with the lowest energy consumption of 167 kWh kg-1 TOC. The reaction was consistent with the pseudo-primary kinetics results with a k value of 0.5480 mol L-1 s-1, which was 16 times higher than that of the commercial Ti/RuO2-IrO2 electrode. The fluorospectrophotometry studies verified that the degradation and mineralization of tetracycline were mainly ascribed to the •OH generated in the electrocatalytic oxidation process. This study thus presents a series of alternative anodes for future industrial wastewater treatment.

Revealing the activity origin of ultrathin nickel metal-organic framework nanosheet catalysts for selective electrochemical nitrate reduction to ammonia: Experimental and density functional theory investigations.

The electrochemical nitrate reduction reaction (NitRR) affords a sustainable way for nitrate mitigation and ammonia synthesis, but there are still some problems such as poor nitrate conversion, low ammonia selectivity, and slow reaction kinetics. A clear structure-performance relationship is essential for designing efficient catalysts and understanding the reaction mechanisms. Herein, ultrathin nickel metal-organic framework (Ni-MOF) nanosheets supported on Ni foam featuring a well-defined stable structure, large electrochemically active surface area, and low electron transport resistance were prepared by a one-step solvothermal process. At -1.4 V, the nitrate reduction, rate constant, ammonia selectivity, and yield reached 96.4%, 0.448 h-1, 80%, and 110.13 ug·h-1·cm-2, respectively. Experimental and theoretical studies demonstrated that the hydroxyl-ligated Ni atoms exhibited higher nitrate adsorption properties and lower activation energy towards NitRR compared to carboxylic acid-ligated Ni atoms. Mechanism investigations revealed a nitrate-to-ammonia reaction pathway involving multiple intermediate species on Ni-MOF nanosheet catalysts. This work offers a new avenue to construct highly efficient electrocatalysts for the selective transformation of nitrate to valuable ammonia.

A polypeptide coating for preventing biofilm on implants by inhibiting antibiotic resistance genes.

Aging population has been boosting the need for orthopedic implants. However, biofilm has been a major obstacle for orthopedic implants due to its insensitivity to antibiotics and tendency to drive antimicrobial resistance. Herein, an antibacterial polypeptide coating with excellent in vivo adhesive capacity was prepared to prevent implants from forming biofilms and inducing acquired antibiotic resistance. A peptide-based copolymer, poly[phenylalanine10-stat-lysine12]-block-3,4-dihydroxy-l-phenylalanine [Poly(Phe10-stat-Lys12)-DOPA] was modularly designed, where poly(Phe10-stat-Lys12) is antibacterial polypeptide with high antibacterial activity, and DOPA provides strong adhesion in both wet and dry microenvironments. Meanwhile, compared to traditional "graft-onto" methods, this antibacterial coating can be facilely achieved by immersing Titanium substrates into antibacterial polypeptide solution for 5 min at room temperature. The poly(Phe10-stat-Lys12)-DOPA polymer showed good antibacterial activity with minimum inhibitory concentrations against S. aureus and E. coli of 32 and 400 µg/mL, respectively. Compared to obvious antimicrobial resistance of S. aureus after continuous treatment with vancomycin, this antibacterial coating doesn't drive antimicrobial resistance upon long-term utilization. Transcriptome sequencing and qPCR tests further confirmed that the antibacterial coating was able to inhibit the expression of multiple peptide resistance factor (mprF) and lipoteichoic acid modification D-alanylation genes (dltB and dltC) that can increase the net positive charge of bacterial cell wall to induce the resistance to cationic antimicrobial peptides. In vivo experiments confirmed that this poly(Phe10-stat-Lys12)-DOPA coating can both effectively prevent biofilm formation through surface contact sterilization and avoid local and systemic infections. Overall, we proposed a facile method for preparing antibacterial orthopedic implants with longer indwelling time and without inducing antimicrobial resistance by coating a polypeptide-based polymer on the implants.

Effect of Sn Addition on Microstructure, Aging Properties and Softening Resistance of Cu-Cr Alloy.

The relationship between microstructure evolution and properties of a Cu-Cr-Sn alloy during aging and high-temperature softening was investigated in detail in the present work. The results show that the addition of Sn refines obviously the size of the Cr phase and enhances the thermal stability of the alloy, which improves the peak-aged hardness of the Cu-Cr-Sn alloy reaching 139 HV after aging at 450 °C for 240 min. In addition, the recrystallization behavior of the Cu-Cr alloy with the 0.12 wt.% of Sn at high temperature is also significantly inhibited. Lots of precipitated Cr phases and a high density of dislocations are found in the Cu-Cr-Sn alloy annealed at high temperature, resulting in the softening temperature of the Cu-Cr-Sn alloy reaching 565 °C, which is higher than (about 50 °C) that of the Cu-Cr alloy.

Maintaining healthy sleep patterns and frailty transitions: a prospective Chinese study.

BACKGROUND: Little is known about the effects of maintaining healthy sleep patterns on frailty transitions. METHODS: Based on 23,847 Chinese adults aged 30-79 in a prospective cohort study, we examined the associations between sleep patterns and frailty transitions. Healthy sleep patterns included sleep duration at 7 or 8 h/d, without insomnia disorder, and no snoring. Participants who persisted with a healthy sleep pattern in both surveys were defined as maintaining a healthy sleep pattern and scored one point. We used 27 phenotypes to construct a frailty index and defined three statuses: robust, prefrail, and frail. Frailty transitions were defined as the change of frailty status between the 2 surveys: improved, worsened, and remained. Log-binomial regression was used to calculate the prevalence ratio (PR) to assess the effect of sleep patterns on frailty transitions. RESULTS: During a median follow-up of 8.0 years among 23,847 adults, 45.5% of robust participants, and 10.8% of prefrail participants worsened their frailty status, while 18.6% of prefrail participants improved. Among robust participants at baseline, individuals who maintained sleep duration of 7 or 8 h/ds, without insomnia disorder, and no-snoring were less likely to worsen their frailty status; the corresponding PRs (95% CIs) were 0.92 (0.89-0.96), 0.76 (0.74-0.77), and 0.85 (0.82-0.88), respectively. Similar results were observed among prefrail participants maintaining healthy sleep patterns. Maintaining healthy sleep duration and without snoring, also raised the probability of improving the frailty status; the corresponding PRs were 1.09 (1.00-1.18) and 1.42 (1.31-1.54), respectively. Besides, a dose-response relationship was observed between constantly healthy sleep scores and the risk of frailty transitions (P for trend < 0.001). CONCLUSIONS: Maintaining a comprehensive healthy sleep pattern was positively associated with a lower risk of worsening frailty status and a higher probability of improving frailty status among Chinese adults.